| Item ID |
Short Description |
Product Type / Details |
#
|
Price |
Note |
| Make |
Model |
| |
|
$ |
|
 |
123396 |
128 Used Carbon valves (IRG-10-189A located in Baton Rouge, LA) |
in Pipeline Equipment and Supplies
|
1
|
|
|
  |
| |
128 Used Carbon valves (IRG-10-189A located in Baton Rouge, LA) Please open the attachment below for the material listing.
The buyer is responsible to bring empty 18-wheelers with side shields to complete this project
Full Payment on this account is due within two working days from the date of award issue.
This will be sold on a lot bid.
• Equipment is SOLD as is WHERE is.
• Buyer will be responsible for trucking.
• Buyer will be responsible for any demurrage fees.
Rules before Bidding:
1. You do not have to register to bid on this material.
2. Just print the bidders page found below and fax it to 262-313-4453. -OR- you can click above on "BID NOW for this item"
3. You can send an e-mail and Reference the Acct# IRG-10-189A BRRF LDY6 Valves to nolanv@materialmg.com
4. MMR recommends you view the equipment before bidding.
5. Please ask our friendly staff any questions you have. |
 |
123154 |
Lorain Power Product |
LRT-18U |
in Crawler-Mounted Cranes
|
1
|
|
|
  |
| |
18 Ton Lorain LRT-18U Crane (Baton Rouge, LA) Lorain 18-Ton Crane
• Model – LRT-18U
• S/N – 36156
• MFG Year – 1975
• Hours – No Hour Meter
• Boom – 3 Section
• Minimum Boom Length – 30 ft
• Maximum Boom Length – 72 ft
• Lifting Capacity – 36,000 lbs at 30 ft.
• Minimum Boom Angle - 0°
• Maximum Boom Angle - 70°
• Engine – Standard GMC 4-53N Diesel
• Cylinders – 4
• Bore and Stroke – 3 7/8” x 4 ½”
• Net HP – 140HP @ 2800 RPM
• Battery – 12V
• Fuel Tank – 40 Gallon
• Cooling System – 7 Gallon
• Crankcase Capacity – 4 Gallon
• Dimensions – 96”W x 17’11” L
• Wheelbase – 108
• Winch only goes up and the cable is cut and needs to be replaced.
• The pump that supplies the winch is not working properly.
• The out riggers work but need some minor repair on the electrical parts.
• Engine runs , but needs a new battery.
• There is a seal leaking on the transmission.
• Left rear tire is flat.
• The boom will go down for transport.
• Last operational date is the summer of 2009.
• Out of service because the pump supplying the cable is not allowing the cable to come down.
• Original manuals for the crane are available.
Payment for equipment will be collected at 100%.
• MMR will load the crane for the buyer.
• Equipment is SOLD as is WHERE is.
• Buyer will be responsible for trucking.
• Buyer will be responsible for any demurrage fees.
Rules before Bidding:
1. You do not have to register to bid on this material.
2. Just print the bidders page found below and fax it to 262-313-4453. -OR- you can click above on "BID NOW for this item"
3. You can send an e-mail and Reference the Acct# TCB-10-001 18 Ton Lorain Crane to jeffr@materialmg.com
4. MMR recommends you view the equipment before bidding.
5. Please ask our friendly staff any questions you have.
|
 |
123779 |
Boiler Stainless Tubes (Houston, Texas IRG-08-149) Opening Bid $501,000 |
in ALL CATEGORIES
|
1
|
|
|
  |
| |
Boiler Stainless Tubes (Houston, Texas IRG-08-149) Opening Bid $501,000
Unused Equipment sells...FAST!!!
See the Bid attachment below labeled Extended documents for more information.
338-Qty 42 foot Lg SA 316 stainless tubes, Approx Lbs 210,000 Lbs, Approx Tons 105.050
280-Qty 316 SR 180 Return bends Approx Lbs 2,240 Lbs, Approx Tons 1.120
56-Qty, 316 SR 90 Weld Elbows, Approx Lbs 224, Approx Tons 0.112
28-Qty 316 LR 45 Weld elbows, Approx 124 Lbs, Approx 0.062 Tons
Total lot weight 212,688 Lbs / 106.344 Tons
|
 |
119608 |
Hammco Inc |
HAC0824T07 |
in Heat Exchangers
|
1
|
|
|
F* |
| |
Forced Draft Air Fin Fan Cooler (Baton Rouge, La) See the extended description below
. |
 |
119821 |
Dorsey |
BOCIE S/T |
in Tractor Trailer Trucks
|
1
|
|
|
  |
| |
IRG-10-098 Lot F1 --- Sea Can Trailer (Baton Rouge, LA) Lot F1 - Dorsey Sea Can Trailer
MFG – Dorsey
Model – BOCIE S/T
MFG Date – 1972
VIN - 098343
Corrosion on Frame
|
 |
123632 |
IRG-10-216AB Used Motors, Pumps, and Compressors (Baton Rouge, LA) |
in Motors
|
1
|
|
|
  |
| |
IRG-10-216AB Used Motors, Pumps, and Compressors (Baton Rouge, LA) Please open the attachment below for the material listing.
Full Payment on this account is due within two working days from the date of award issue.
This will be sold on a lot bid.
• Equipment is SOLD as is WHERE is.
• Buyer will be responsible for trucking.
• Buyer will be responsible for any demurrage fees.
Rules before Bidding:
1. You do not have to register to bid on this material.
2. Just print the bidders page found below and fax it to 262-313-4453. -OR- you can click above on "BID NOW for this item"
3. You can send an e-mail and Reference the Acct# IRG-10-216 BRPP Fire Water Pond Equipment to nolan.valenti@exxonmobil.com
4. MMR recommends you view the equipment before bidding.
5. Please ask our friendly staff any questions you have. |
 |
125346 |
IRG-10-274 Approximately 100,000 LBS of 304SS |
in Scrap Metal: Mixed or by Type/Shape
|
1
|
|
|
N* |
| |
IRG-10-274 Approximately 100,000 LBS of 304SS LOT A - Approximately 100,000 lbs of 304SS Cyclone Legs with refractory located in Torrance, CA (8 Pieces Total).
LOT B - Approximately 8,000 lbs of clean 304SS
***This material will be bought on a per lb basis***
***Scale Tickets to Govern***
SEE EXTENDED DESCRIPTION BELOW FOR ANALYTICAL BACKGROUND MATERIAL REPORTS.
Terms
• Material will be paid at 90% of the estimated weight.
• Material will be loaded for the buyer.
• Equipment is SOLD as is WHERE is.
• Buyer will be responsible for trucking.
• Buyer will be responsible for any demurrage fees.
Rules before Bidding:
1. You do not have to register to bid on this material.
2. Just print the bidders page found below and fax it to 262-313-4453. -OR- you can click above on "BID NOW for this item"
3. You can send an e-mail and Reference the Acct# IRG-10-274 to jeff.robinson@exxonmobil.com
4. MMR recommends you view the equipment before bidding.
5. Please ask our friendly staff any questions you have.
|
 |
124459 |
Lever and Gear Operated Valves (Torrance, CA) IRG-10-254 |
in Pipeline Equipment and Supplies
|
1
|
|
|
  |
| |
Lever and Gear Operated Valves (Torrance, CA) IRG-10-254 Bidding by the lot on the following items:
LOT A - 8 Qty Mogas Lever Operated Valves
LOT B - 8 Qty Mogas Gear Operated Valves
LOT C - 1 Qty 12" 900LB Handwheeled Operated Valve
LOT D - 4 Qty 10"Stem balls
***SEE EXTENDED DESCRIPTION BELOW FOR FULL INVENTORY***
• Valves will be loaded for the buyer.
• Equipment is SOLD as is WHERE is.
• Buyer will be responsible for trucking.
• Buyer will be responsible for any demurrage fees.
Rules before Bidding:
1. You do not have to register to bid on this material.
2. Just print the bidders page found below and fax it to 262-313-4453. -OR- you can click above on "BID NOW for this item"
3. You can send an e-mail and Reference the Acct# IRG-10-254 to jeff.robinson@exxonmobil.com
4. MMR recommends you view the equipment before bidding.
5. Please ask our friendly staff any questions you have.
|
 |
97353 |
Trefileurope |
|
in Offshore Facilities and Marine Equipment
|
2
|
|
|
F* |
| |
Mooring Spiral Strand Cable in Kwanda Base, (Location Angola Africa) Please refer to account number (IRG-09-064)
Reel #1 -- Spare 68mm Spiral Strand Wire Rope, 990 meters length, one socket end fitted, coiled onto Steel Reel 4.8x4.0x4.3m, 33.2 metric tonnes. Stored on a double reel.
Reel #2 -- Spare 68mm Spiral Strand Wire Rope, 990 meters length, one socket end fitted, coiled onto Steel Reel 4.8x4.0x4.3m, 33.2 metric tonnes. Stored on a double reel. .
• • • Additional Specifications & Information • • • .
• Mooring Wire Rope
• Low Torque Galfanized Sheathed Spiral Strand
• Wire rope steel nominal diameter 68 mm
• Minimum Breaking Load 4,600 kN
• HDPE Jacket Thickness 9 mm per ASTM D-1248 (98) standard
• Wires are hot dipped galfanized with “Corzal” coating (305 mr/m2 minimum per ASTM A 856 class 100 standard
• Manufacturer: Trefileurope
• Date of Manufacture: 1st Quarter 2007
• Place of Manufacture: France
• Manufacturer’s Operating and Maintenance manual along with testing and certification documentation available to winning bidder with approval of manufacturer
• Each mooring cable on double transportation reel 4.8x4.0x4.3m, 33.2 metric tones
• Manufacturer’s lifting spreader beam available
Located at company's yard at the Kwanda Shorebase in Angola.
|
 |
125118 |
Pumps and Motors (IRG-10-290) Baton Rouge, LA |
in Motors
|
1
|
|
|
  |
| |
Pumps and Motors (IRG-10-290) Baton Rouge, LA Description
This material will be bought by the lot
The sale will be broken up into the following lots
LOT A – Pumps
LOT B – Motors
LOT C – Pumps and Motors
LOT D – Steam Turbine
LOT E – Gearbox
Please see extended description attachment below
Terms
• Material will be paid at 100%.
• Material will be loaded for the buyer.
• Equipment is SOLD as is WHERE is.
• Buyer will be responsible for trucking.
• Buyer will be responsible for any demurrage fees.
Rules before Bidding:
1. You do not have to register to bid on this material.
2. Just print the bidders page found below and fax it to 262-313-4453. -OR- you can click above on "BID NOW for this item"
3. You can send an e-mail and Reference the Acct# IRG-10-290 to jeff.robinson@exxonmobil.com
4. MMR recommends you view the equipment before bidding.
5. Please ask our friendly staff any questions you have.
|
 |
109015 |
Schaivi |
Convert Jet Thermal Laminator |
in Film Line Equipment
|
1
|
|
|
  |
| |
Schiavi Convert Jet Thermal Laminator (Macedon, New York) Equipment will be sold as is where is. Max Working Width: 1300 MM (51.20")
Max Web Width: 1350 MM (53.17")
Mechanical Speed: 300M/Min (1000FPM)
Max Operating Speed: 220 M/Min (720FPM)
(The operating speed is influenced by the type of adhesives and solvents employed, depth of cylinder engraving, type of material to be handeled and operator skillfulness.)
Main Unwind Max Reel Diameter: 800 MM (31.50")
Second Unwind Max Reel Diameter: 800 MM (31.50")
Unwind Reel Inside Core Diameter: 76 MM (3")
Rewind Reel Max Diameter: 1000 MM (39.37")
Rewind Reel Core Inside Diameter: 152 MM (6")
Web Tension Adjustment Range: from 4 to 40 KG (8.8 to 88 lbs |
 |
125649 |
Transformer Fins and Forklift (IRG-10-094) Ventura, CA |
in ALL CATEGORIES
|
1
|
|
|
F*N* |
| |
Transformer Fins and Forklift (IRG-10-094) Ventura, CA 8 Qty Transformer Fins (36) and 1 Clark LPG Forklift See below for full inventory.
This material will be bought on a lot basis Please bid per lot.
LOT A – Transformer Fins
• Qty – 8
• MFG – Tranter
• Fins per set – 36
• Fits Transformers 34.5 KV to 4160V
• Dimensions - 69" x 131" x 12"
LOT B – Forklift
• MFG – Clark
• Model – C 500 45
• Size – 4500
• S/N - 910 4042 235
• Type – LPG
• Hours – 2,607
Terms
• Items will be paid at 100% within three working days of being issued the Award Letter.
• Items will be loaded for the buyer.
• Equipment is SOLD as is WHERE is.
• Buyer will be responsible for trucking.
• Buyer will be responsible for any demurrage fees.
Rules before Bidding:
1. You do not have to register to bid on this material.
2. Just print the bidders page found below and fax it to 262-313-4453. -OR- you can click above on "BID NOW for this item"
3. You can send an e-mail and Reference the Acct# IRG-10-094 to jeff.robinson@exxonmobil.com
4. MMR recommends you view the equipment before bidding.
5. Please ask our friendly staff any questions you have.
|
 |
124180 |
Used HDPE 740 Feet (IRG-10-239) Location Baton Rouge, LA |
in ALL CATEGORIES
|
1
|
|
|
  |
| |
Used HDPE 740 Feet (IRG-10-239) Location Baton Rouge, LA
This is a LOT BID as is where is.
DO not bid by the pound.
Used for a Cooling water refinery service application in Baton Rouge.
(Line Item # 1 Pipe)
Polypipe 18.00 x 32 Jts, wall 1.636, Class 160 DR11, Total feet 665 and 24,406 Lbs total weight.
Performance Pipe Discoplex 18.00 x 2 Jtx, wall 1.636, DR11 2000 Psi, Total feet 22 and 812 Lbs total weight.
(Line Item # 2 Pipe Bends) Polypipe 18.00 x 8 Jts, wall 1.636, DR11 class 160, 53 feet and 1,945 Lbs total weight.
Total lot weight of this sale is 13.58 Tons.
Please bid by the lot and 100 % of the funds are due within 48 hrs of the award notification.
|